JLA D Ind Tumble Dryers
The JLA D Ind tumble dryers are engineered for optimal efficiency, featuring six pre-set drying cycles that allow staff to easily select options based on the load size. Equipped with robust three-phase motors for enhanced durability, these dryers also include a large lint filter to ensure effective drying.
Additional user-friendly features, such as sliding doors and tilt options, facilitate the loading and unloading of large items like duvets and sheets.
Specifications
JLA D200
JLA D310
JLA D200
| Height Non-Tilt Gas (mm) | 2902 |
| Height Non-Tilt Steam (mm) | 2957 (3239 when steam is operating) |
| Height Tilt Option Gas (mm) | 2902 (2978 when tilted) |
| Height Tilt Option Steam (mm) | 2956 (3173 when tilted) |
| (32961 when steam is operating) | |
| Width Non-Tilt (mm) | 1917 |
| Width Tilt Option (mm) | 1943 |
| Depth Non-Tilt (mm) | 1562 |
| Depth Tilt Option (mm) | 1670 |
| (2217 gas, 2172 steam when tilted) | |
| Net Weight Gas (Kg) | 1529 |
| Net Weight Steam (Kg) | 1644 |
| Drum Volume (m3/ltr) | 2.11/2110 |
| Sliding Door Opening Width (mm) | 933 |
| Control (Microprocessor) | Phase 7 |
| Heating | Gas/Steam |
| Electrics Gas Heated (Volt/ph/Amp) | 0400/3/20 |
| No. of Water Connections (cold) | 1 |
| Size (“BSP) | 3/4 |
| Gas Rating kW (Btu/hr) | 189 (750,000) |
| Size (“BSP) | 1 / 1/4 |
| Steam Rating Kg (lb/hr) | 405 (890) |
| Size Supply & Return (“BSP) | 2 1/2 |
| Compressed Air Non-Tilt m3 (ft3/hr) | 0.12 (4.25) |
| Compressed Air Tilt Option m3 (ft3/hr) | 0.2 (7.0) |
| Pressure (psi) | 90 |
| Size (“BSP) | 3/8 |
| Airflow m3 (ft3/min) | 150 (5300) gas, 184 (6500) steam |
| Exhaust (mm Ø) | 508 |
| Ventilation/Make-Up Air m2 (in2) | 0.42 (650) gas, 0.5 (780) steam |
JLA D310
| Maximum Capacity (Dry Weight) | 310 lb (140.61 kg) |
| Tumbler Diameter | 62-1/2” (158.75 cm) |
| Tumbler Depth | 60” (152.40 cm) |
| Tumbler Volume | 106.50 cu ft (3015.744 L) |
| Tumbler/Drive Motor | 5 hp (3.73 kW) |
| Door Opening* | 36-3/4” x 43” (93.35 cm x 109.22 cm) |
| Door Sill Height – Level | 36-1/2” (92.71 cm) |
| Compressed Air Volume | 11 cfh (0.31 cmh) |
| Compressed Air Connection** | 3/8” F.N.P.T. / 3/8” Quick Connection |
| Exhaust Connection (Diameter) | 24” (60.96 cm) |
| Water Connection*** | 3/4” F.N.P.T. |
| Gas | |
| Voltage Available | 208-575v 3ø 3,4w 50/60 Hz |
| Blower/Fan Motor (Rear / Side Exhaust) | 15 hp / 25 hp (11.19 kW / 18.64 kW) |
| Approx. Net Weight | 5,000 lb (2,267.96 kg) |
| Approx. Shipping Weight | 5,310 lb (2,408.58 kg) |
| Heat Input | 1,125,000 Btu/hr (283,495 kcal/hr) |
| Airflow 50 Hz / 60 Hz | 6,500 cfm (184.06 cmm) |
| Inlet Pipe Connection | (2) 1-1/2 M.N.P.T. / 1-1/2” M.N.P.T. |
| Steam | |
| Voltage Available | 208-575v 3ø 3,4w 50/60 Hz |
| Blower/Fan Motor | 25 hp (18.64 kW) |
| Approx. Net Weight | 5,425 lb (2,460.74 kg) |
| Approx. Shipping Weight | 5,735 lb (2,601.35 kg) |
| Airflow 50 Hz/60 Hz | 8,500 cfm (240.69 cmm) |
| Steam Consumption | 1,153 lb/hr (522.99 kg/hr) |
| Operating Steam Pressure | 80 psi (± 10 psi) (5.52 bar (± 0.69 bar) |
| Boiler Horsepower (Normal Load) | 35 Bhp |
| Supply Connection | 2” M.N.P.T. |
| Return Connection | 2” M.N.P.T. (Non-Tilt) / 1-1/4” M.N.P.T. (Tilt) |
Organisations we work with
